Can you drive with code P2647?

Can you drive with code P2647?

You can still drive the vehicle till you get this fixed, the reason for the CK ENG LT is to protect the catalytic convertor and the catalytic convertor protects the environment from harmful emission from the engine, you drive this too long you degrade the catalytic convertor.

Will bad VTEC solenoid symptoms?

When the VVT solenoid activates, oil is sent to lubricate the variable valve timing chain and gear assembly….Symptoms of a Bad or Failing Variable Valve Timing (VVT) Solenoid

  • Check Engine Light comes on.
  • Engine oil is dirty.
  • Rough engine idle.
  • Decrease in fuel economy.

At what speed does VTEC kick in?

VTEC will engage at 2300rpm. If, once it engages, you floor it to 100% throttle, it still stay in VTEC. The problem with this is however, VTEC is hurting performace at this low of an rpm at 100% throttle.

What is the p2647 error code for Honda?

As soon as the tachometer touched 2700 rpm, the car bucked and the check engine light (CEL) came on! Luckily I had my trusty engine code reader handy, so I pulled over and read the error code. The error was P2647. A related error is P2646. P2647 – Rocker Arm Actuator Control System Stuck On

Is there an easy fix for the p2647 error code?

It is a relatively inexpensive method to help clear sludge from your engine and has been known to eliminate the P2647 issue. No signal getting to the VTEC – Vehicle feels ‘gutless’ at high RPM

What can set the p2652 code on an engine?

The most common problem that can set the P2652 code is the engine oil. Before replacing any parts change the engine oil with the factory recommend oil weight. The factory bulletin suggests that replacing the VTEC oil pressure switch (P/N 37250-PNE-G01, H/C 6737217) take care of the problem.

What does the p2647 Honda engine code mean?

Before replacing any parts change the engine oil with the factory recommend oil weight. The factory bulletin suggests that replacing the VTEC oil pressure switch (P/N 37250-PNE-G01, H/C 6737217) take care of the problem. The cost to diagnose the P2647 HONDA code is 1.0 hour of labor.

It is a relatively inexpensive method to help clear sludge from your engine and has been known to eliminate the P2647 issue. No signal getting to the VTEC – Vehicle feels ‘gutless’ at high RPM

The most common problem that can set the P2652 code is the engine oil. Before replacing any parts change the engine oil with the factory recommend oil weight. The factory bulletin suggests that replacing the VTEC oil pressure switch (P/N 37250-PNE-G01, H/C 6737217) take care of the problem.