Can new tires cause check engine light?

Your check engine light has nothing to do with new tires unless the tire shop damaged a sensor while lifting the truck. Just to let you know 3-48 in the owners manual does say that a change in tires can make the light come on.

Why does my check engine light come on when I accelerate?

A vehicle’s check engine light illuminates whenever there is a malfunction. If the check engine light happened to be flashing during these episodes of acceleration, that means there is a serious fault, such as cylinder misfiring, that requires immediate repair.

Will check engine light come on for low coolant?

Low coolant in the radiator of your car can trigger the malfunction illumination light (MIL), also known as the “check engine” light. Low coolant can affect the internal temperature of the engine, which is protected by the antifreeze.

Can spark plugs cause a check engine light?

Worn spark plugs or spark plug wires can trigger your check engine light to come on. This can cause your engine to misfire and your check engine light to pop on. A flashing engine light could mean that potentially catastrophic misfires are taking place, say our technicians.

How often are you supposed to put coolant in your car?

every 30,000 miles
A typical mechanic will recommend changing coolant every 30,000 miles. But many will tell you, changing the coolant is not even on their radar. An owner’s manual might recommend changing the coolant/antifreeze after the first 60,000 miles, then every 30,000 miles.

Why does my Acura check engine light keep coming on?

When your Acura check engine light remains on, the problem could be something as simple a loose gas cap. It can also be an indication of a serious engine issue, a problem with the emission system or in some cases even an indication of a problem with the automatic transmission.

What is the OBD code for an Acura check engine?

P1201Cylinder 1 Misfire – Compare possible causes/symptoms for this Acura check engine light code to the Generic OBD II code P0301 P1202Cylinder 2 Misfire – Compare possible causes/symptoms for this Acura check engine light code to the Generic OBD II code P0302

Where is the DTC code on an Acura?

1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2. Turn the ignition on. 3. MIL will indicate DTC’s by outputting a number of flashes. Remember, these are manufacturer specific codes only.

When does the Check Engine light turn on?

The orange, engine-shaped icon on your car dashboard’s instrument cluster is programmed to turn on when the vehicle’s electronic brain detects something is wrong.