Can low oil pressure cause P0011?

Bottom line, you’re dealing with a low oil pressure situation. The code P0011 is just a distraction and will go away once you fix the low oil pressure. Bad cams will not result in low oil pressure.

Can too much oil cause P0011?

But the main cause of the P0011 code is dirty or sludgy engine oil. If the oil is too thick or dirty, the oil passages in the camshaft phasers might get clogged or stuck, hence resulting in a constantly advanced timing in the bank 1 camshaft.

How much does it cost to fix a P0011?

How Much Does It Cost To Repair Error Code P0011. The cost of fixing error code P0011 can range from $40 to $2000 depending on the cause of the problem and the age of the vehicle.

Can low oil cause p0021?

Low oil level will definitely affect the variable cam timing. This type of code will usually take quite a few ‘good’ trips for the ECU to clear the code on its own.

How do you fix the engine code P0021?

What repairs can fix the P0021 code?

1. Clearing the Check Engine Light codes and road testing to verify the code.
2. Changing the oil and filter to the proper oil viscosity for the engine specifications.
3. Repairing or replacing the wiring to the camshaft oil control valve for bank 2 intake camshaft.

What is the cause of engine code p0011?

What Is The Cause Of Code P0011? 1 Engine oil is dirty 2 Engine oil is too low 3 Engine oil is incorrect viscosity 4 Camshaft variable valve timing control solenoid failure 5 Camshaft phaser is seized in the advanced position 6 Continuous oil flow to Variable Camshaft Timing chamber

Why does my Audi A4 have a p0011 trouble code?

This is great for both power and fuel economy. If your A4 has the P0011 trouble code it will typically not pass the State emissions tests. The Audi A4 utilizes camshaft actuators to change the valve lift depending on the RPM of the motor. This allows for a more efficient cam profile at any speed.

What should I do if I find a p0011 set?

If the initial P0011 sets and other codes are present then erase all codes and do five camshaft drive cycles and then re-investigate which codes come back. If any of these codes are present disregard and erase. If they come back it is electrical wiring or connection failure.

What does the p0011 DTC on an Impala mean?

That consists of a few different components but the P0011 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The “A” camshaft is either the intake, left, or front camshaft.

What does trouble code p0011 mean on a car?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be.

What are the symptoms of Audi A4 p0011?

Here are some of the typical symptoms of P0011 in the Audi A4: Poor Idle Quality – If the camshaft actuator fails while giving the engine aggressive valve timing, it’ll idle roughly.

If the initial P0011 sets and other codes are present then erase all codes and do five camshaft drive cycles and then re-investigate which codes come back. If any of these codes are present disregard and erase. If they come back it is electrical wiring or connection failure.

How to check the p0011 Audi camshaft position?

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0011 AUDI code is 1.0 hour of labor.