What to do about a leaking water pump on a corvette?
What to do about a leaking water pump on a corvette?
Make sure the gaskets stay in place and use a thread sealer on the bolts. This will prevent water from seeping past the threads and causing a drip at the bolt head. Zip Corvette also has available new mount bolts & hardware.
Can a 1980 Corvette turn over or start?
1980 corvette battery tests that it is good, but the car will not start or turn over. new gauges for 1975 vette don’t seem to work properly. Bought new gauges for my 1975 vette from Ecklers. Fuel gauge reads 1/2 tanks yet i ran out of gas?? Water gauge reads 100 but should read around …
Why is the seat belt buzzer on my Corvette not working?
The seat belt buzzer for my corvette won’t shut off and I cannot find the relay to remove it to shut it up. Can anyone direct me to the place where … Click here to write your own. I have a 1977 corvette. To put the back main gasket in, can you pull the oil pan and put it in from there?
What are the symptoms of a defective water pump?
You even check the dipstick – no water in the oil – so it must be the water pump. Leaks are just one of the symptoms of a defective water pump. You may hear a rumble or even growl coming from the pump. The fan may even start to wobble. Both of these symptoms are a sign of water pump bearing failure.
Where to get a new water pump for a 1964 Corvette?
All you need are a few hand tools, some antifreeze, a little time and the right Corvette pump. Since we could supply everything but the water pump, we contacted Zip Corvette Parts, 8067 Fast Lane, Mechanicsville, VA 23111, (800) 962-9632 and they sent out a brand new water pump for our Project 1964 Corvette.
How is cylinder pressure tested on a corvette?
Cylinder pressure testing is accomplished with a supply of compressed air. First the valve cover should be removed and the valve adjustment backed off on the cylinder being tested. Now compressed air is introduced into the cylinder with an air-hold.
Why is my intake camshaft lobe worn on my Corvette?
If an intake camshaft lobe is worn it will not allow fuel and air to be drawn into the cylinder, which will make the engine have a steady miss. From 1972-1981 worn camshaft lobes were a frequent occurrence on small block Chevrolet engines.
Why is the Corvette fuel tank higher than the carburetor?
The Corvette fuel tank is slightly higher than the carburetor to allow fuel to be gravity-fed to the carburetor. The fuel tank position will allow idling and low speed performance even with a failed fuel pump.
