How wide is a 66 GTO rear end?
How wide is a 66 GTO rear end?
Built to the stock overall width (60″) and pinion offset specs 60″ is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
How big is the wheel well on a 1968 GTO?
When the above is completed, the width of the wheel well will go from about 10-1/2” to exactly 12” on the early GTO’s, and even wider on the 1968 to 1972 models. At this point a 275/60R15 tire can be installed using rims with the proper backspacing.
What are the gear codes on a 1965 Pontiac GTO?
Pontiac Rear End Gear Codes Year Model Rear Gear Teeth Count Standard Code 1965 GTO 3.08 40/13 WE 1965 GTO 3.08 40/13 XE 1965 GTO 3.23 42/13 WF 1965 GTO 3.23 42/13 XF
How big is the axle flange on a 1966 GTO?
Size for the standard mid-year 1966 and later GTO differential is as follows: Axle flange to axle flange is 60 15/16 inches Backing plate to backing plate is 55 1/2 inches Spring perch centerline to centerline is 35 inches
How big is the shock mount on a 1966 GTO?
Size for the standard mid-year 1966 and later GTO differential is as follows: Axle flange to axle flange is 60 15/16 inches. Backing plate to backing plate is 55 1/2 inches. Spring perch centerline to centerline is 35 inches. Shock mount centerline to centerline is 49 1/4 inches.
Where are the axles located on a 1970 Pontiac?
1970 : W/C-lock axles-Front of Right hand (passenger) tube,about 3″ from carrier 1970 : non c-lock axles-: Rear of left hand (driver) tube,about 3″ from carrier 1967-1969 : Rear of left hand (driver) tube,about 3″ from carrier and stamped on left rear brake drum. 1966 : Rear of right hand (passenger) tube etc… etc…
How big are the tires on a GTO?
Our bolt-in design requires NO floor cutting or fabrication. Since our rails are narrowed, a narrowed fuel tank is required. We can supply a stainless steel tank to fit our chassis. Want wider tires? All G-Machine Chassis allow for up to 345mm-wide rear tires if you minitub the wheel wells
What was the GM a body in 1968?
Bolt-in modern high-performance chassis for 1968, 1969, 1970, 1971 and 1972 GM A-Bodies. Our A-body is torsionally 200% stiffer than the stock A-body frames, & weighs 125lb LESS, roller-to-roller. Installation is simple.
