How to replace the alternator on a Chevy 5.7 V8 350?

Here is how to replace the alternator on a Chevrolet truck with a 350 cubic inch 5.7 V8 engine. Replacing the alternator on a Chevy 5.7 V8 is easy. You have to remove the accessory drive belt, and then disconnect two electrical connectors, and remove three bolts, and the alternator will come out.

What kind of alternator does a Delco Remy have?

Select your preferred location and we’ll note which parts are ready to be picked up TODAY. Alternator, Delco Remy, 12/14/16 V, 105 amps, Internal Regulator, Serpentine Pulley, Cadillac, Chevy, GMC Alternator, Natural, 140 Amp, Buick, Cadillac, Chevy, GMC, Oldsmobile, Hummer, Pontiac, V8, V6, Diesel, Each

Why does my alternator not change the voltage?

If the voltage change and go back to normal when you tap it lightly with a hammer while the car is running – the Carbon brushes are worn out and needs to be replaced in the alternator, or the whole alternator. Sometimes there is an electrical problem in the alternator, and even if the voltage does not change, it might be damaged.

How can I tell if I have an alternator problem?

To differentiate an alternator problem from the battery, you will need to use a voltmeter to check for voltage. First, turn off the engine and check the battery voltage. A fully charged battery should have a reading of 12.65 volts. Next, turn on the engine and recheck the voltage. You should have a reading of 13.5 to 14.5 volts.

How many AMPS is my GM truck alternator?

(Any of those codes means that you have a 105 Amp Alt) Click to expand… Did you find the recommended reading relevant to this discussion? Help us improve your recommendations by telling us what you would like to see.

Is the Silverado High output alternator a new alternator?

Alternator is definitely brand new. Apprehension set in though as the higher output alternator was a little larger than the high amp OEM GM alternator (98 Silverado). The new alternator bolted right in.

How does an alternator work on a Chevy?

The GM alternator used in all Chevrolet models is easy to install, as it is connected using only a few wires. The alternator converts the engine’s mechanical rotations into an electrical current using a pulley-and-belt system. This current is fed to the car’s battery, charging it for later use.

Can a generator be converted to an alternator?

Choices, Choices, Choices… There are three kinds of upgrades you can do. You can go from a generator to an alternator, from an externally regulated alternator to an internally regulated alternator, or you can take the monster leap and jump from a generator all the way to an internally regulated alternator.

Can you convert an alternator to a new pulley?

Snag any first-generation internally regulated alternator (from around ’73 to ’85) and it will bolt right on in place of your existing unit. You can even swap your original pulley over to the new one if you need to.

Can a 1 wire alternator be converted to 3 wire?

One nice thing about the alternators advertised as 1-wire alternators is that most of them appear to be capable of being wired up as 1-wire AND 3-wire. It’s up to you which installation you want to pursue. Since I’m doing the 3-wire, internally regulated alterator conversion, I think I can offer more detailed advice on doing this properly.

Can a externally regulated alternator be converted to an internally regulated one?

Internally Regulated Alternator Conversion Upgrading your alternator from externally to internally regulated As part of the wiring upgrades on my car, I’m switching from the old 63amp, externally regulated, alternator to a newer style 100amp, internally regulated alternator hooked up using the 3-wire setup.

Can a battery be connected to an alternator?

In newer models, the alternator is internally regulated and can be connected with only one wire linked to the car’s battery. Step 1 Disconnect the car’s battery before beginning any work to avoid the risk of electric shock while wiring your alternator. Step 2

What should the voltage be for a Chevy C10 alternator?

Notes: 78 amp. With A/C. Premium reman. In order to keep your battery 100 percent charged, you need a voltage output between 13.5 and 14.8. Our performance alternator for Chevy C10 is designed to optimize induction and keep all of your accessories fully powered.

Where was the 1981 Chevy K10 short bed built?

1981 Chevrolet K10 Scottsdale Short Bed. Originally built in March of 1981 in Fremont, California. Has been a Southern California truck all its life until August of 2018 when I moved to the Boise, More Info ›

How to replace the alternator on a Chevy 5.7 V8 350?