Where can I buy a Chevy El Camino engine?

It’s a car, it’s a truck – no, it’s your Chevrolet El Camino, which is known for its comfort and cargo tray. Be sure your classic car rides smoothly by buying a new Chevrolet El Camino engine from AutoZone. The motor produces the kinetic energy that your car needs to move, so it’s important to purchase quality engines for Chevy El Camino.

When did Chevrolet stop making the El Camino?

Production resumed for the 1964–1977 model years based on the Chevelle platform, and continued for the 1978–1987 model years based on the GM G-body platform . Although based on corresponding General Motors car lines, the vehicle is classified in the United States as a pickup.

What to do if your El Camino engine is smoking?

If your exhaust is smoking, the piston rings might be damaged, which requires El Camino replacement engines to fix the problem. At AutoZone, we offer the right products at the right prices, and our staff is ready to assist you.

What was the horsepower of a Chevy El Camino in 1960?

Floor coverings were in medium-tone vinyl. Mid-1959 powertrain availability was carried over with minimal changes for 1960: The base 283-cid V8 was detuned a bit for fuel economy and was now rated at 170 bhp (127 kW; 172 PS), and the fuel-injected engines were officially gone.

Which is the left side of the Chevy El Camino?

Left Side, Driver Side. 1973-1977 Chevrolet El Camino Rear Quarter Panel. Left Side, Driver Side. 1973-1977 Chevrolet El Camino Inner & Outer Felt Window Sweep Belt – A Body – 4 Piece Kit – Driver and Passenger Side

What are the dimensions of a Chevrolet El Camino?

1973-1977 Chevrolet El Camino Front Floor Pan. Left Side, Driver Side. 1982-1987 Chevrolet El Camino Front lower “A” pillar panel. Measurement: 14″ x 8″ x 2″. Right Side, Passenger Side. 1978-1987 Chevrolet El Camino Floor Pan Half, 25″ x 65″. Left Side, Driver Side. 1978-1987 Chevrolet El Camino Floor Pan Half, 25″ x 65″.

When did the Chevy El Camino Sprint come out?

Although based on corresponding General Motors car lines, the vehicle is classified and titled in North America as an SUV. GMC’s badge engineered El Camino variant, the Sprint, was introduced for the 1971 model year.

How much does a performance crate engine cost?

$250 MAIL-IN REBATE † (1) ON THE PURCHASE OF A CHEVROLET PERFORMANCE TRANSMISSION WITHIN 180 DAYS OF OF THE PURCHASE OF ANY CHEVROLET PERFORMANCE CRATE ENGINE † (2). PARTS INTENDED FOR COMPETITION USE ONLY. Click for more details. PARTS INTENDED FOR COMPETITION USE ONLY.

Is the 350ho turn key small block crate engine?

PROPOSITION 65 WARNING. Click for more details. Our 350 HO is assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec Small-Block ever installed at the factory.

What kind of engine does a 350 HO have?

A cast-iron block with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50-inch valves. Its durable rotating assembly has aluminum pistons delivering a 9.0:1 compression ratio.

What kind of engine did the Dodge 318 have?

The 318 was not just limited to Dodges, but also powered Plymouth and Chrysler cars as well. The engine was remarkably efficient, durable and proved to be Chrysler’s mainstay for many of its vehicles over the decades. Chrysler was known for its superiority in engine technology over Ford and General Motors.

When did the Dodge Magnum 318 come out?

Magnum 318 Chrysler introduced the Magnum 318 in 1992 that came with a new block and heads. The Magnum featured high-flow heads for better intake. The Magnum, which was used in Dodge trucks, was a better engineered and more efficient engine.

Are there rear ends that can be remanufactured?

If you need an engine, this is the place for you!! All rears are manufactured using quality tested cores received at our facility. Each core is checked for straightness and damage then sent to tear down. Upon tear down a thorough inspection is done to confirm that the core can be remanufactured to our standards.

What was the horsepower of an El Camino in 1980?

The 1980 El Camino started out the 1980s with few changes, though engine choices were shuffled a little. The base V6 displaced 229 cubic inches, up from 200 the year before. Horsepower increased from 94 to 115 hp (70 to 86 kW).

What kind of engine was in a 1966 Chevy El Camino?

In 1966, GM added a 396 cu in (6.5 L) V8 engine to the lineup rated from 325 to 375 hp (280 kW). The 1965 327 would run low 15s in the 1/4 mile (at some 90 mph), while 1966 to 1969 models were easily into the mid- to upper-14s. New sheetmetal highlighted the 1966 El Camino, identical to the Chevelle.

When did the Chevrolet small block engine come out?

(LT5) The Chevrolet small-block engine is a series of V8 automobile engines used in normal production by the Chevrolet division of General Motors between 1954 and 2003, using the same basic engine block.

Where did the Chevy 265 small block come from?

The original 265 can trace its existence back to the Corvette division, where the demanding engineers were seeking an upgrade over the current Corvette motor, Chevy’s “stove bolt” inline-six. Lead engineer Ed Cole and Corvette guru Zora Arkus-Duntov developed the light, simple motor in just 15 weeks time.

When did the Chevy 307 small block come out?

The 307 was the last of the Generation I small blocks that link back to the original motors of the mid-1950s. Produced from 1968 to 1972 it utilized the same 3.875″ bore as the very first Chevy small block, but with a wider journals to accept the 327 crankshaft.

Where can I buy a Chevy El Camino engine?