What does the OBDII code p0717 mean?
What does the OBDII code p0717 mean?
2009 Chevrolet Traverse Chevrolet Factory Service Bulletin OBDII Code P0717 What does this mean? Cost of diagnosing the P0717 CHEVROLET code Labor: 1.0 The cost of diagnosing the P0717 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
How much does it cost to repair a p0717 Chevy?
The cost to diagnose the P0717 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What is the fault code for an Impala turbine shaft?
Thanks, Input and output shaft sensors or signal failure problems should throw fault codes P0717 & P0722. I have the workshop manual for this car with all the wiring diagrams, and ohms values to check etc, so i’ll give your recommendations a try…. 06 impala 3.5 95000 mi no add ons.
What are the symptoms of turbine shaft code p0717?
Because of the wave plate failure, possibly in combination with the failure mode, these transmissions would suffer from reverse gear lockout or slipping or harsh engagement in 3 rd or 5 th Gear. What are the symptoms of code P0717 ?
P0717 Meaning. The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications.
What does p0717 input turbine speed sensor circuit no signal trouble code?
If you have a P0717 Input Turbine Speed Sensor Circuit No Signal trouble code, this post will help you understand what it is and how to fix it. The computer wants to know if the transmission is working properly. So it reads the speed of the input shaft and compares it to the speed of the output shaft.
Is the body valve still p0717 after rebuild?
Decided to rebuild it, scanned before and was showing also P0717. We rebuild the tranny, replaced the ISS sensor, but still hard shifts with bangs. Went back to shop and they told me the body valve is from 2006 and they reinstalled the original one,and again hard shifts and code P0717 again !!!!
What is the input shaft speed of a DTC p0717?
P0717 The transmission input shaft speed is less than 50 RPM for 5 seconds. DTC P0716 and P0717 are Type B DTCs. The TCM commands maximum line pressure. The TCM freezes transmission adapts. The TCM calculates input speed from the automatic transmission output shaft speed sensor and commanded gear.
When is the diagnostic trouble code p0717 detected?
The Diagnostic Trouble Code (DTC) P0717 is detected when TCM or ECM receives no signal from the sensor. Need more information on how to fix the P0717 CHEVROLET code?
Decided to rebuild it, scanned before and was showing also P0717. We rebuild the tranny, replaced the ISS sensor, but still hard shifts with bangs. Went back to shop and they told me the body valve is from 2006 and they reinstalled the original one,and again hard shifts and code P0717 again !!!!
If you have a P0717 Input Turbine Speed Sensor Circuit No Signal trouble code, this post will help you understand what it is and how to fix it. The computer wants to know if the transmission is working properly. So it reads the speed of the input shaft and compares it to the speed of the output shaft.
The cost to diagnose the P0717 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
