Are there any problems with Chevy Impala wheel bearings?

I’ve owned 4 Chevy Impalas since 2000. No problem with first 3, however my 2014 has had wheel bearing problems. At 44,000 miles both the rear axle bearings needed replaced (very noisy), of course wheel bearings are excluded from the power train warranty. Just today at 66,000 the front bearings and hubs needed replaced.

What is the problem with my Chevy Impala?

Sounds like you have a bad wheel bearing and if it is grinding then it is getting hot, so it fried the wheel sensor. Replacing the wheel bearing hub assembly has the new wheel speed sensor on it. 52 people found this helpful. Same issue with my 2010 impala , bought used from a place that had 08-12 models .

What does Service StabiliTrak mean on a Chevy Impala?

Same issue one my 2013 Impala never replace the wheel hubs the bearings and still the same problem it’s kind of hesitant and it sounds almost like a grinding noise and then the traction control symbol comes on the dashboard and it says service stabilitrak any suggestions? 305 people found this helpful.

How much does it cost to replace ABS on a Chevy Impala?

You need to replace the ABS wheel speed sensor wiring harness. 40 dollars. This is such a known problem at Chevrolet that they keep both sides in stock. 235 people found this helpful.

How much does it cost to replace a wheel bearing on a Chevy Impala?

The average cost for a Chevrolet Impala wheel bearing replacement is between $247 and $268. Labor costs are estimated between $79 and $100 while parts are priced at $168. Estimate does not include taxes and fees.

How do you replace the hub on an Impala?

8. pull the rotor off the hub. 9. unplug the wheel speed sensor connector from the hub. 10. remove the three bolts on the backside of the knuckle that hold the hub on. i believe these are 13mm. 11. use a puller and remove the hub from the knuckle. you may also try the method shown in the video, which requires an air chisel and hammer.

You need to replace the ABS wheel speed sensor wiring harness. 40 dollars. This is such a known problem at Chevrolet that they keep both sides in stock. 235 people found this helpful.

How can I tell if my Chevy Impala wheel is bad?

Chevy Impala Bad Wheel Bearing Diagnosis Test Drive– The best way to diagnose bearing noise in your Impala is to take it for a drive. You’ll be looking to hear the hum increase as the speed picks up. Jack and Wiggle– With your Impala on jack stands, you’ll want to look and see if the wheel is wiggling at the bearing.

Why does my Chevy Impala make a high pitched hum?

If your Chevy Impala is making a high pitched noise or hum, it could be a sign of a bad wheel bearing. There are several different vehicular components that can If your Chevy Impala is making a high pitched noise or hum, it could be a sign of a bad wheel bearing.

How do you replace a front hub bearing on an Impala?

Remove the hubcap or wheel cover from wheel. 2. use impact gun or large breaker bar with 36mm socket (could be different size with different years and/or models) to remove the axle nut. 3. loosen the lug nuts, but do not remove them all the way. just simply break them loose.

Can a bad wheel bearing cause a Chevy Impala to lock up?

It is not recommended to drive your Chevy Impala on a bad wheel bearing. They are dangerous. As they go bad they create heat. This heat can eventually cause the tire to lock up while going down the road. Replacing a wheel bearing is not that expensive, even if you take it in to a shop.

Are there any problems with Chevy Impala wheel bearings?