What kind of rack do I need for a Mustang?
What kind of rack do I need for a Mustang?
Our Manual 1971-72 Pinto Racks, Mustang II Racks, Omni Rear Steer Racks, 5.0 Mustang, and 2005-2011 Mustang Manual Racks are all ideal choices for manual steering. These manual steering racks are responsive, easy to install, lighter and stronger than the OEM racks and come in a variety of different ratios, pivot points, and pinion lengths.
What are the installation instructions for a Mustang 2?
This set of instructions have been put together so the average guy should be able to put an updated suspension kit on their hot rod or street rod project. You do not need to understand, or have a degree in front end geometry to be able to successfully install the hub to hub Mustang 2 Suspension kit.
What kind of RHD do I need for my 1965 Mustang?
Currently, we offer a Power and Manual RHD Kit for the 1965-70 Mustang, a Power RHD Kit for the 1963-82 Corvette, and a Power Kit for a RHD Tri-5. We’re also willing to work with you to design something for your vehicle if you can provide us with the necessary dimensions and specs.
What can you do with power rack and pinions?
Our Power Rack and Pinions are ideal for upgrading your classic car or truck, hot rod, street rod, or performance vehicle to the comfort and reliability of a modern power steering system.
How to install rack and pinion on Mustang?
Install the spindles onto the lower ball joints and then install the upper ball joints into them. Now install the rack and pinion assembly using the two 5/8” bolts, washers and lock nuts supplied with the crossmember. Install the tie rod ends onto the rack and into the spindle arms. Estimate the alignment at this point.
What kind of rack does a Ford Mustang use?
Your Southern Rods & Parts Power Rack & Pinion contains the following items: 1) Power Rack & Pinion 2) Rack Spacers 2) 5/8-11 x 4 1/2” Bolts The rack & pinion supplied is a 1994 and later “V” style Ford Mustang unit. This rack can be used on any of our Front Suspension Crossmembers that have the slotted rack mount on the passenger side.
Where is the high pressure fitting on a Mustang II?
This power rack has a “V” style input shaft and uses the same tie rod ends as the Mustang II rack. The high pressure fitting is the M14x1.5 thread port which is toward the front of the rack, and the return fitting is M16x1.5 thread port that is at the rear, closest to the pinion input shaft.
This set of instructions have been put together so the average guy should be able to put an updated suspension kit on their hot rod or street rod project. You do not need to understand, or have a degree in front end geometry to be able to successfully install the hub to hub Mustang 2 Suspension kit.
