How do you remove a condenser from a Cavalier?
How do you remove a condenser from a Cavalier?
Disconnect the hose clamp of the over flow tank at the radiator using pliers or Phillips screwdriver and pull the hose free. If your Cavalier model has a condenser attached to the radiator, remove the mounting screws with a Phillips screwdriver and lift the radiator assembly from the engine compartment by hand. Set the new radiator in place.
When do you need to replace the radiator in a Chevy truck?
If the coolant is not properly flowing and the radiator is the cause, you need to replace it. The exact process of replacing the radiator in your Chevrolet car can vary depending on the exact year of the truck. Other factors exist as well, including whether the truck has automatic transmission or not.
How do you remove the radiator from a Chevy Silverado?
A Chevy Silverado with an automatic transmission has two coolant lines from the radiator to the the transmission you need to detach, as well as the upper and lower radiator hoses. Also remove the coolant sensor wire, if you have one. Unscrew the two bolts on top of the radiator holding it to the supports with a 10mm socket.
How do you cool a Chevy Camaro radiator?
Drive your Chevy Camaro onto a pair of jack stands, giving you room to work underneath it. Let the engine cool and drain the radiator by unscrewing the lower drain plug. Remove the air duct assembly for older model Camaros, as well as the air filter. This is a large pipe attached to the top of the radiator.
Why does my Cavalier 2.0 liter fan run at 190?
2000 Cavalier 2.0 Liter . Started loosing coolant. Pressure tesed no leaks. Found system pushing coolant out of overflow hose like a garden hose. Replaced thermostat, same problem. Fan runs @ 190 OK. I can only think there is a restricition in the system causing the backup.
Why is my Cavalier 2.2 leaking coolant?
There is a leak due to corrosion in an elbow in the coolant system in my son’s 2002 Cavalier 2.2. The upper radiator hose connects to the elbow, which goes into the engine (block?).
What’s the problem with my 2000 Cavalier heater?
My 2000 cavalier is loosing some serious coolant. There is no sign of external leakage and I’ve checked the oil and it’s normal. There isn’t any smoke either. Where is it going. I’m also loosing power and it’s getting hard to start. The heater blows hot on and off, the thermostat has been replaced and the temp. gauge is on red and fluctuates.
How many miles does a Chevy Cavalier have?
I have a 2002 Chevy Cavalier with 105,000 miles on it. I’ve had the coolant replaced at around 75,000 (which I later discovered was a mistake on my part, but the dealership suggested it and was happy with the $$$)
Disconnect the hose clamp of the over flow tank at the radiator using pliers or Phillips screwdriver and pull the hose free. If your Cavalier model has a condenser attached to the radiator, remove the mounting screws with a Phillips screwdriver and lift the radiator assembly from the engine compartment by hand. Set the new radiator in place.
A Chevy Silverado with an automatic transmission has two coolant lines from the radiator to the the transmission you need to detach, as well as the upper and lower radiator hoses. Also remove the coolant sensor wire, if you have one. Unscrew the two bolts on top of the radiator holding it to the supports with a 10mm socket.
How to replace a broken radiator in your car?
Radiator replacement. How to replace a car radiator in your car DIY with Scotty Kilmer. How to replace a broken or leaking radiator quickly and cheap. Radiator location, inspection, removal and repair. DIY car repair with Scotty Kilmer, an auto mechanic for the last 42 years. 1. Bluetooth Scan Tool: http://amzn.to/2nfvmaD 2.
If the coolant is not properly flowing and the radiator is the cause, you need to replace it. The exact process of replacing the radiator in your Chevrolet car can vary depending on the exact year of the truck. Other factors exist as well, including whether the truck has automatic transmission or not.
