What does the check engine light mean on a Toyota Yaris?

If the check engine light in your Toyota Yaris starts flashing, that means that the problem needs immediate attention and your Toyota should be brought in immediately. This twinkling light usually hints a draconian engine misfire allowing unburned fuel to be dumped into the exhaust system.

How do you turn off the check engine light on a Toyota Yaris?

1. Using a Scan Tool

1. Connect the scan tool to the onboard diagnostic connector. This is found under the steering column.
2. Press the READ button on the scan tool, and look for any error codes.
3. Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.

What does the warning light on a Toyota Yaris mean?

Toyota Yaris Mk1 engine warning light – this warning symbol indicates a malfunction within the engine module and needs to be checked out asap. For your Toyota Yaris we would advise you to use the iCarsoft TYT V1.0 Toyota OBD Code Reader which will quickly read any error codes and tell you where the fault is.

What does low coolant temperature indicator on Toyota Yaris mean?

Low engine coolant temperature indicator Indicates the engine coolant temperature is cool. *1: These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed.

How to check the oil level in a Toyota Yaris?

1. Pull off the road as soon as it’s safe to do so, ideally on level ground. 2. Switch off the engine and wait for 5 minutes for the engine oil to drain into the oil pan. 3. Using the dipstick, check the engine oil level. 4. If oil levels are low or below the minimum mark on the dipstick, add oil ensuring not to overfill.

What to do if your Toyota Yaris has a fault?

For your Toyota Yaris we would advise you to use the iCarsoft TYT V1.0 Toyota OBD Code Reader which will quickly read any error codes and tell you where the fault is. Once the fault is fixed (probably a new sensor or coil which needs replacing) the fault code or trouble code can be cleared and the light will be removed from the dashboard.

Toyota Yaris Mk1 engine warning light – this warning symbol indicates a malfunction within the engine module and needs to be checked out asap. For your Toyota Yaris we would advise you to use the iCarsoft TYT V1.0 Toyota OBD Code Reader which will quickly read any error codes and tell you where the fault is.

For your Toyota Yaris we would advise you to use the iCarsoft TYT V1.0 Toyota OBD Code Reader which will quickly read any error codes and tell you where the fault is. Once the fault is fixed (probably a new sensor or coil which needs replacing) the fault code or trouble code can be cleared and the light will be removed from the dashboard.

1. Pull off the road as soon as it’s safe to do so, ideally on level ground. 2. Switch off the engine and wait for 5 minutes for the engine oil to drain into the oil pan. 3. Using the dipstick, check the engine oil level. 4. If oil levels are low or below the minimum mark on the dipstick, add oil ensuring not to overfill.

Is there an OBD code reader for Toyota Yaris?

If you need to reset a dashboard light or diagnose a fault on your Toyota Yaris we would advise you to go for the iCarsoft TYT V1.0 Toyota OBD Code Reader. Its an extremely popular choice amongst Toyota owners worldwide because it covers such a wide range of modules within the vehicle and has received excellent feedback from buyers.