How often should you change the serpentine belt on a Ford Taurus?

It is a ribbed belt with grooves in it. Although Ford recommends checking the belt every 30,000 miles or 24 months, according to some documentation, a serpentine belt on a Ford Taurus can last up to 100,000 miles. Find the automatic serpentine belt tensioner. The tensioner pulley has a bolt you will rotate to release tension on the belt.

What does the belt tensioner on a Ford Taurus do?

The Ford Taurus belt tensioner serves to hold the serpentine drive belt in place. The tensioner, which consists of an arm and a pulley, presses down on the serpentine belt to keep it in constant contact with the other pulleys in the serpentine system.

What’s the best way to replace a serpentine belt?

Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.

When to replace serpentine belt on VW Jetta?

Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.

Where to put a new belt on a Ford Taurus?

Use your memory or a belt routing diagram to put the new belt on. Ford usually includes a belt routing diagram on the fan shroud or elsewhere in the engine compartment.

Where do I find the serpentine belt routing diagram?

Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.

Use your memory or a belt routing diagram to put the new belt on. Ford usually includes a belt routing diagram on the fan shroud or elsewhere in the engine compartment.

How do you remove a serpentine belt on a car?

To remove the belt use a belt tensioner tool, if you have access to one, to release the tension. You can also put the 15mm wrench on the tensioner pulley bolt and rotate it clockwise.

What kind of wrench do I need to change pulleys on Ford Taurus?

Once you have the parts you’re about ready to get started, but be sure to have the tools. On the Ford Taurus, both pulleys are held on by 15mm bolts. Therefore at a minimum, you need a 15mm wrench to do the job.

Can a serpentine belt be replaced without going to the shop?

It’s a crucial part of the engine assembly—here are step-by-step instructions for replacing your serpentine belt without bringing your car to the shop. This belt, obviously past its prime, ran for 115,000 miles, and it was still within the tension limits specified. It’s toast, regardless.

How to replace the serpentine belt in a Ford Taurus?

For a OHV engine types, you’ll rotate the tensioner clockwise; for OHC engine types, you’ll want to rotate it counter-clockwise. Slip the old belt off and slowly release the tensioner. Use your memory or a belt routing diagram to put the new belt on.

How much is a serpentine belt from Advance Auto Parts?

Advance Auto Parts has 66 different Serpentine Belt for your vehicle, ready for shipping or in-store pick up. The best part is, our Ford Taurus Serpentine Belt products start from as little as $5.99. When it comes to your Ford Taurus, you want parts and products from only trusted brands.

Where can I find the Ford Taurus fitment form?

Use the fitment form at the top of the page to select your exact year and engine type for your Ford Taurus. Designed for high mileage multiple-accessory drives, Dayco’s W profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years.

Is there a Repair Manual for a Ford Taurus?

Motor Era offers service repair manuals for your Ford Taurus – DOWNLOAD your manual now! Ford Taurus service repair manuals 1996-1999 Ford Vehicles Workshop Repair Service Manual (2.9GB DVD IMAGE!)

How to change serpentine belt and pulleys on a 2006 Ford Taurus?

For those who would like to know how to change the serpentine belt and pulleys on a 2006 Ford Taurus, follow along. The other day I noticed my daughter’s car had a small intermittent squeak, or squeal, under the hood of her 2006 Ford Taurus.

How do you change a serpentine belt on a car?

After the arm is released, you can remove the belt from the rest of the engine pulleys and remove the old belt. Using the 3/8” ratchet, remove the bolt holding the idler pulley bolt. The bolt may have a clip on the backside of the pulley and a washer on the front. The washer, clip, and bolt will be re-used with the new pulley.

Where are the pulleys on a serpentine belt?

The serpentine belt weaves over and under the various engine devices (power steering pump, water pump, alternator, along with the idler and tensioner pulleys). Many vehicles have belt routing diagrams under the hood or in the owner’s manual. Make sure you find it and verify the routing before removing the old belt.

How to replace alternator belt if air conditioner is broken?

How to replace alternator belt if the air conditioner is broken, you can use a short serpentine belt without air conditioning. How to replace alternator belt if the air conditioner is broken, you can use a short serpentine belt without air conditioning. Skip navigation Sign in Search Loading… Close This video is unavailable. Watch later Share

How to stop alternator belt squeaking and chirping?

How To STOP ALTERNATOR BELT Squeaking & Chirping Noise FOREVER!!! – YouTube How To STOP ALTERNATOR BELT Squeaking & Chirping Noise FOREVER!!!

How often should you change the serpentine belt on a Ford Taurus?