How big is the water pump on a Chevy Silverado?
How big is the water pump on a Chevy Silverado?
Tighten the six bolts in a crisscross pattern to 132 inch-lbs, and then again to 22 ft-lbs. Re-install the belt tensioner, and tighten the bolts to 37 ft-lbs. Figure 7. Install the new water pump.
Why does my Chevy Silverado water pump keep blowing out?
A seeping water pump is often the cause of coolant odor, and an expansion tank that often needs topping off. Although it may not blow out like a hose, the water pump will get worse. Keep reading and learn how to replace the water pump in your Chevy Silverado right in your driveway with basic tools.
Where does the coolant go in a Chevy Silverado?
GM Dexcool coolant carries combustion heat away from the cylinders. It flows out through the upper radiator hose, cooled while descending through the radiator, and returns to the engine via the lower radiator hose as the thermostat opens at about 180 degrees.
Tighten the six bolts in a crisscross pattern to 132 inch-lbs, and then again to 22 ft-lbs. Re-install the belt tensioner, and tighten the bolts to 37 ft-lbs. Figure 7. Install the new water pump.
A seeping water pump is often the cause of coolant odor, and an expansion tank that often needs topping off. Although it may not blow out like a hose, the water pump will get worse. Keep reading and learn how to replace the water pump in your Chevy Silverado right in your driveway with basic tools.
Are there any problems with the Chevy 6.0 engine?
4 Common Chevy 6.0 Engine Problems And How To Fix Them? In 2020, you won’t get newly released Chevy 6.0L engines, as Chevrolet moved on to the 6.2L Vortec Engine right after 2019. But as one of the most popular engines from the brand, we believe there are plenty of Chevy 6.0 engines equipped on automotive.
GM Dexcool coolant carries combustion heat away from the cylinders. It flows out through the upper radiator hose, cooled while descending through the radiator, and returns to the engine via the lower radiator hose as the thermostat opens at about 180 degrees.
Where was the 2004 Chevy Silverado 2500HD last serviced?
1st owner drove an estimated 13,621 miles/year • 2nd owner drove an estimated 10,140 miles/year • 3rd owner drove an estimated 8,888 miles/year. Last serviced at 178,455 miles in Sevierville, TN on 03/26/19 • Vehicle serviced. Mileage: 194,602 miles Body Type: Pickup Color: Silver Engine: 8 Cyl 6.0 L No accident or damage reported to CARFAX.
How many miles does a Chevy Silverado 2500HD drive?
1st owner drove an estimated 6,035 miles/year • 2nd owner drove an estimated 11,857 miles/year • 3rd owner drove an estimated 11,914 miles/year • 4th owner drove an estimated 17,006 miles/year • 5th owner drove an estimated 13,388 miles/year • 6th owner drove an estimated 0 miles/year.
What kind of engine does a Chevy Silverado have?
The 6.0 engine had nine variations over its 20 year life span. However, the most popular engine versions were the LQ4 and LY6. Overall, the Vortec 6000 engine was most popular in HD-model Silverado’s and Sierra’s along with the Suburban and Yukon XL car models.
What causes a Chevy 6.0 Vortec engine to leak?
They are subject to extremely high heat temperatures which can cause gaskets and bolts to warp and go bad, creating an exhaust leak. On the Chevy 6.0 vortec engine, the exhaust leak is most commonly caused by the exhaust manifold bolts completely breaking off. When the bolts break off, air gaps will open up causing exhaust gasses to escape.
How to replace small block Chevy Waterpump 350 5.7?
How to replace a waterpump on a small block chevy 350 in a 1990 1500 Silverado Suburban. Make sure you tighten all fasteners to the required torque specification. Put sealer on bolt threads that go into a water jacket.
How much does it cost to replace a water pump in a Chevy Silverado?
The average cost for a Chevrolet Silverado 1500 water pump replacement is between $527 and $568. Labor costs are estimated between $157 and $198 while parts are priced at $370. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
What should I do if my Chevy k1500 water pump breaks?
A quality water pump replacement for Chevy K1500 pushes coolant through your engine, preventing your truck from overheating. If you notice a puddle of water or coolant under your truck, it’s likely a sign of a broken water pump.
When to replace a water pump in a truck?
It’s important to fix or replace a water pump at the first sign of damage in order to avoid an overheating engine down the road. AutoZone offers a wide selection of replacement parts, including K1500 water pumps, to help get your truck back on the road.
When to know if your water pump is broken?
If you notice a puddle of water or coolant under your truck, it’s likely a sign of a broken water pump. It’s important to fix or replace a water pump at the first sign of damage in order to avoid an overheating engine down the road.
What do I need to replace oil pump on GMC Truck?
You either need a good strap wrench, or the flywheel tool. Get a good breaker bar with a long pipe to break it loose. Then get the Chrysler puller from Autozone, it works perfect. Be sure to put a bolt or something in the snout of the crank to prevent messing up the end when using the puller.
Where is the oil pump on a 5.3L motor?
Added a bit of oil, started her back up, and i had virtually no pressure at idle, and about 20psi at crusing RPMs. How hard is it to replace the oil pump on a 5.3L motor? i heard it was on the front of the block, outside of the oil pan, and it was cam driven.
